Sensitive Electrochemical Quantification of Proanthocyanidins in Grapevine (Vitis vinifera) by Utilizing Disposable Screen-printed Carbon Electrodes

This work presents quantification of proanthocyanidins (PAs) isolated from grapevine using disposable screen-printed carbon electrodes (SPCE). Procyanidin B2 (B2) used as a model to investigate the electrochemical characteristics of complicated PAs structures in Britton Robinson buffer solution using cyclic voltammetry and square wave voltammetry. B2 exhibits a well-defined reversible redox wave at +0.49 V vs. Ag/AgCl. Significantly, the B2 was determined over a linear concentration range of 3.45–34.6 μM with a detection limit of 2.07 μM. The SPCE was used to analyze PAs in grapevine samples, and the results were consistent with those obtained using Folin-Ciocalteu standard method.     

Ultra-Small-Bandgap Conjugated Polymers Based on an N−B←N Unit

Since the breakthrough of conductive polymers in 1977, scientists have made great efforts to create small band gap (E_g) conjugated polymers. Two general strategies to design small E_g conjugated polymers are quinoid structure and donor-acceptor structure. Ultrasmall E_g conjugated polymers (E_g<1.0 eV) always suffer from poor air stability because of high-lying HOMO energy levels. In this work, we report a new strategy to design ultrasmall E_g conjugated polymers by N−B←N unit, i.e. balanced resonant boron-nitrogen covalent bond (B−N) and boron-nitrogen coordination bond (B←N). The resulting polymer exhibits an E_g of 0.82 eV and an onset absorption wavelength of >1500 nm. Moreover, the polymer exhibits excellent air stability because of its low-lying LUMO/HOMO energy levels. An unprecedented property of this polymer is the selective light absorption in the infrared range (800–1500 nm) and high transparency in the visible range (400–780 nm). Using this property, for the first time, we demonstrate the application of conjugated polymers as transparent thermal-shielding coating layer on glass, which reduces indoor solar irradiation through window and consequently reduces power consumption for cooling of buildings and cars in summer.     

B(C6F5)3-Catalyzed Aza-Friedel–Crafts Reaction of Indolizines with 2-Aryl-3H-indol-3-ones

A Friedel–Crafts reaction of indolizines with 2-aryl-3H-indol-3-ones catalyzed by B(C₆F₅)₃ is described. This protocol gives access to indolizine derivatives that are valuable building blocks in synthetic and pharmaceutical chemistry. The reaction proceeds under mild conditions, affording various C2-quaternary indolin-3-ones based on indolizine with high yields and regioselectivities. Moreover, the synthetic transformations of the target products were realized by N-methylation and trifluoromethane sulfonation.     

重量法测定土壤水溶性盐总量的优化

土壤水溶性盐是表征土壤盐碱化程度的重要指标,也是评价耕地地力的重要参数,被纳入第三次全国土壤普查（“三普”）监测指标体系中。重量法是测定土壤水溶性盐总量的最常用方法,其测定过程易受多种因素影响,导致其测定结果不准。鉴于此,本文设计试验分别验证了水溶性盐浸提和浸提液固液分离这两个过程对测定结果的影响,结果表明浸提液固液分离是影响土壤水溶性盐总量测定准确度和精密度的主要因素。基于此进一步探究4种不同固液分离方式（布氏漏斗过滤、滤膜真空抽滤、离心、滤纸组合过滤）对测定结果的影响,结果表明相较于其它方式,滤纸组合过滤测定结果准确度高,适用于土壤水溶性盐总量的测定。对改进后的重量法测定土壤水溶性盐总量进行方法学确认,结果表明其检出限为0.01 g/kg,测定下限为0.04 g/kg;方法的准确度和精密度、适用范围等均符合相关要求。本文推荐的土壤水溶性盐总量测定方法为：土壤样品采用1:5土水比浸提,180 r/min振荡3 min,浸提液采用滤纸组合自然过滤;其测定结果的准确度和精密度符合相关要求。本文旨在为“三普”内业检测提供参考和借鉴,为全面摸清不同区域土壤水溶性盐含量水平及土壤盐渍化程度提供技术支撑。     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe2BiTaO7,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究。结果表明Fe2BiTaO7为立方晶系烧绿石结构,空间群为Fd3m,禁带宽度为1.72 e V。通过比较Fe2BiTaO7、P25TiO2、掺氮Ti O2和Bi2In Ta O7的可见光光催化降解罗丹明B,发现Fe2BiTaO7降解效果及催化活性均高于其它催化剂,并且Fe2BiTaO7降解罗丹明B效率是掺氮二氧化钛的1.5倍。Fe2BiTaO7降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.022 93 min-1。研究了罗丹明B可能的降解路径和Fe2BiTaO7在可见光下降解苯酚的效果。Fe2BiTaO7(可见光)光催化剂系统适用于纺织工业废水处理。     

微波水热两步法合成高可见光响应Ag2S/ZnO及其光催化性能、机理

在不同的制备条件下,通过微波水热两步法获得了一系列Ag₂S/ZnO光催化剂,采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见漫反射吸收光谱(UV-Vis/DRS)、扫描电子显微镜(SEM)和N₂吸附-脱附等测试手段对产物结构和形貌进行了表征。结果表明,产物以六方纤锌矿ZnO为主,其晶型结构并未随着反应温度和Ag₂S物质的量的增加而改变。Ag₂S的引入显著增强了光催化剂在可见光区的吸收,使吸收边带发生红移,同时抑制了ZnO(001)晶面的生长。另外,所得产物的形貌随着Ag₂S物质的量的增加从爆米花状转变为少量的柱体颗粒,且BET比表面积经过复合后明显减小。以罗丹明B为目标降解物,研究并比较了一系列Ag₂S/ZnO光催化剂对罗丹明B的光降解性能。结果表明,n_Ag2S/n_ZnO=1:10时,光催化剂在紫外光、可见光和模拟日光的照射下具有最好的光催化效果,优于目前应用最广泛的市售P25。另外,所制备的光催化材料Ag₂S/ZnO经4次循环使用后,其降解效率没有明显下降,表明该催化材料具有一定的光催化稳定性。经捕获实验研究发现,在Ag₂S/ZnO的光催化反应中空穴起主要作用,并根据绝对电负性估算了复合材料Ag₂S/ZnO的能带位置,据此提出了可能的光催化反应机理。     

PW11Cu/TiO2膜光催化剂的制备及可见光催化性能

以PW₁₁Cu为可见光活性组分,TiO₂为载体结构组分,采用溶胶-凝胶法制备了PW₁₁Cu/TiO₂复合膜可见光催化剂,并用UV-Vis DRS、IR、Raman、XRD、SEM、TEM等手段对催化剂的光吸收性质、化学组成、晶相、表面结构和形貌进行了表征,同时,以模型污染物RhB的可见光降解为探针评估了它的光催化活性,考察了膜处理温度、PW₁₁Cu含量和溶液酸性对催化活性的影响,最后,通过催化剂循环降解RhB试验评估了PW₁₁Cu/TiO₂膜的稳定性。实验结果表明,PW₁₁Cu/TiO₂膜对可见光有明显吸收,低温(100℃)处理的膜为无定形态,高温(500℃)处理的膜为多晶态;低温处理的膜具有较高的可见光催化活性,用于RhB的可见光催化降解,在中性条件下反应80 min,RhB的降解率为100%,TOC去除达32%(4 h);提高溶液酸性有利于催化剂活性的提高,在pH=2.5的条件下,达到100%的RhB降解仅需30 min。在本实验条件下,PW₁₁Cu的最佳剂量是3.0 g。经过10次循环降解RhB,催化剂的光催化活性仍保留约90%。     

pH值对Bi_2MoO_6晶体形貌和可见光催化性能的影响

以(NH4)6Mo7O24·4H2O和Bi(NO3)3·5H2O为原料,采用普通水热法制备Bi2Mo O6光催化剂,研究p H值对制备该光催化剂的影响。对所制备的系列样品,采用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、比表面积分析仪、X射线光电子能谱仪(XPS)和紫外-可见漫反射(UV-Vis DRS)进行表征。结果表明:p H值对Bi2Mo O6晶体的物相组成、形貌和光催化性能均有显著影响。p H值为1~7时,所制备的样品为纯相Bi2Mo O6,p H值为9或11时,出现第二相Bi3.64Mo0.36O6.55;随着p H值的升高,形貌依次为纳米棒、纳米片和无规则纳米颗粒。在可见光(λ≥420 nm)照射下,通过光催化降解罗丹明B(Rhodamine B,Rh B),探讨了制备Bi2Mo O6的p H值对其可见光催化活性的影响。当p H=7时,制备的样品光催化效果最好,光照50 min后对初始浓度为5 mg·L-1的罗丹明B溶液的降解率为85%。     

Sensing behavior of BN nanosheet toward nitrous oxide: A DFT study

In order to develop a sensor for the detection of toxic N₂O molecules, the interaction of pristine and Aldoped BN nanosheets with an N₂O molecule was investigated using density functional theory calculations. It was found that unlike the pristine sheet, the Al-doped sheet can effectively interact with the N₂O molecule so that its electronic properties and conductivity are dramatically changed. Webelieve that replacing a B atom of the BN sheet with an Al atom may be a good strategy for improving the sensitivity of these nanosheets toward N₂O, which cannot be trapped and detected by the pristine sheet.     

重组人胰岛素注射液中B3和B3iso脱氨人胰岛素的分析与鉴定

建立了有效分离重组人胰岛素注射液中B3和B3iso脱氨人胰岛素的反相高效液相色谱(RP-HPLC)法,并采用高效液相色谱-四极杆-飞行时间质谱联用技术(HPLC-MS/MS)对其进行氨基酸序列的鉴定。在《中国药典》2010版重组人胰岛素注射液有关物质检查分析方法的基础上,优化流动相p H值,以0.2mol/L硫酸盐缓冲液(p H 3.6)-乙腈(90∶10)作为A相,乙腈-水(50∶50)为B相,梯度洗脱,分别收集杂质峰1和杂质峰2,脱盐浓缩后,用丝氨酸蛋白酶(V8酶)酶切,取部分酶切溶液经三(2-羧乙基)膦盐酸盐(TCEP)还原,分别得到还原和非还原肽段溶液,利用LC-MS/MS鉴定氨基酸序列,未知杂质分别为重组人胰岛素B3位发生脱氨和异构化的产物,即B3和B3iso脱氨人胰岛素。将优化后的方法与《中国药典》方法对市售重组人胰岛素注射液进行有关物质的对比分析,已上市厂家的重组人胰岛素注射液均有不同程度的B3和B3iso脱氨人胰岛素存在。该方法不影响重组人胰岛素其它有关物质的检测,可用于监控人胰岛素注射液产品储存过程中脱氨类杂质的增长趋势。